Skener zvierat s dlhým dosahom

Predstavenie produktu:

Tento skener zvierat s dlhým dosahom je bezdrôtová čítačka RFID, ktorá podporuje EMID, FDX-B (ISO1784/85) a elektronické značky v bežných formátoch snímania čiarových kódov/QR kódov. Vďaka použitiu pokročilej rádiofrekvenčnej technológie RFID je rozpoznávacia vzdialenosť dlhšia.

Veľkosť 2 ~ 12 mm Štítok sklenenej rúrky> 8 cm.

Size 30mm animal ear tag> 23cm (based on the antenna of the tag) .

Tento skener zvierat využíva displej OLED s vysokým jasom, ktorý sa dá jasne zobraziť vo vnútorných aj vonkajších silných svetelných podmienkach. Vďaka vlastnej úložnej funkcii dokáže uložiť až 6 000 štítkov, ktoré možno nahrať do počítača prostredníctvom dátového kábla USB, bezdrôtového pripojenia 2,4G, Bluetooth atď.

Skener zvierat má stabilný výkon a jednoduchú obsluhu a je vhodný na manažment malých zvierat, riadenie vysledovateľnosti, skladové zásoby a manažment materiálu.

Návod na obsluhu:

1. Kliknutím na tlačidlo sa zapne a na obrazovke sa po vykonaní samokontroly zobrazí rozhranie spúšťania:

2. Press the “SCAN” button to enter the scan code mode, and then press “SACN” button to start scanning, the screen displays the scanning result:

3. Press the “READER” button to enter the card reading mode. When the screen displays “((((((0)))))”, move the machine close to the card. After the reading is successful, the card number will be displayed on the screen, and the label type card number will be displayed above the label; if the label reading is unsuccessful, Will show “No Tag”

4. Press ◄ or ► on the startup interface to enter the setting interface, then press ◄ or ► to move the cursor, select the item to be set, press the “READER” button to confirm, and press the “SCAN” button to return

5. Card reading mode settings After entering the setting interface, select “Reader Mode” and press the “READER” button to enter. There are three card reading modes, namely key trigger/read once/continuous. After selecting the mode to be set, press the read/write key to confirm, and the corresponding mode is displayed [Y]

6. Data query Select “Data Query” in the setting interface, press “READER” button to enter, you can view the recorded data, including data number, data type, data content, press ◄ or ► to switch

7. Storage method Select “Storage Mode” in the setting interface, and press the “READER” button to switch the mode switch. When [Y] is displayed in the back, the storage mode is turned on, and the scanned data will be stored in the device memory; when [N] is displayed in the back, the storage mode is closed and the scanned data will not be saved

8. Transfer method Select “Transfer Mode” in the setting interface, and press the “READER” button to enter the setting. There are three transmission modes, 2.4G wireless/Bluetooth/USB port. [+] means it is turned on, and the data will be transferred to the connected device; [-] means closed, data will not be transmitted through this connection, press the READER key to switch the switch

9. Data upload Select “Data Upload” in the setting interface and press the “READER” button to upload the data stored on the device to the connected external device. After the upload is successful, the screen displays “Upload OK!”

10. Data deletion Select “Data Delete” in the setting interface and press the “READER” button to delete the data stored on the device. After the deletion is completed, the screen displays “Delete OK!”

11. Wireless matching When the wireless receiver is unsuccessful or needs to be paired again, select “wireless match” in the setting interface, press the “READER” button to enter the pairing, “Pls Plug Dongle!” appears on the screen, plug the wireless receiver into the USB port and wait 2 seconds, when “Dongle pair OK!” appears on the screen, it means the pairing is successful

12. Language setting Select “Language Set” in the setting interface, press the READER key to enter the language setting, Press ◄ or ► to switch language, press “SCAN” button to return

13. Nastavenie bzučiaka

Select “Buzzer Sound” in the setting interface, press the “READER” button to switch the sound switch, [Y] means on, [N] means off

14. Bluetooth settings Select “Bluetooth” in the setting interface and press the “READER” button to enter the Bluetooth settings. There are three transmission methods: HID transmission, SPP transmission, and BLE transmission. Press ◄ or ► to switch, press “READER” button to select

15. Sleeping time Select “Sleep Time” in the setting interface, press the “READER” button to enter the setting, press ◄ or ► to switch the time, press the “READER” button to confirm after selection, the screen displays “Setup OK!” Indicating that the setting is successful

16. Clock setting Select “Clock Setting” in the setting interface, press the “READER” button to enter the setting, press ◄ or ► to adjust, press the “READER” button to confirm after the setting is completed, the screen displays “Setup OK!” Indicating that the setting is successful

17. Reset Select ” Factory Reset ” in the setting interface, press the “READER” button to confirm the reset

18. View version information Select “version information” in the setting interface, press “READER” button to view the device version information, “SW version” represents the software version; “HW Version” represents the hardware version

Parametre produktu:

Opis štruktúry:

① Scan the window                              ② OLED display

③ Scan key / back key                          ④ Page it up

⑤ Page down / enter                           ⑥ power supply

⑦ Read key / confirmation key            ⑧ Type-c interface

⑨ Wireless receiver                              ⑩ Battery compartment