380 동물 RFID 태그 리더기

Animal RFID Tag Reader Manufacturer

This 380 Animal RFID Tag Reader is a low-frequency tag scanner that adopts wireless identification technology

and it supports reading FDX-A, FDX-B, HDX (SO11784/85,) etc. tags.

This scanner uses high high-brightness OLED display, which can be seen clearly in

a well-lit environment. It can store max 20000 records of tag information with

its built-in memory. Users can upload the information to the computer through

USB 케이블.

This product is stable with simple operation, which is widely used for small animals

management, resource management, railway inspection, etc.

Parameters of Animal RFID Tag Reader

디스플레이 창:

This unit comes with a 128*64 high-brightness OLED display capable of showing

tag info, time communication mode, storage mode, etc.

자동 종료:

If no operation or data transmission occurs within 30 seconds in the power-on state,

The system will automatically shut down and enter the sleep state.
언어 설정:

기본 언어: 중국어.

To change the language, move the “arrow” cursor to the “language

Setting” menu, press the “scan” key to enter the language setting menu

and choose by using the “arrow” pointer.(The language of the device has

Chinese, English, Russian, and Japanese)
Change settings:

Move the arrow pointer to the “repeat settings” option and press scan to toggle between “Y” and “N”.

(The rereading mode is set to “Y” mode, and the device saves the same or different tag information,

When it is set to “N” mode, the read tag information does not store the current data when the same tag

Information is saved in memory, and the buzzer makes two beeps. Move the “arrow” cursor to “data mark” and press the “scan” key to go into the data mark menu for marking. Currently, it is set to default to no mark. This function is a data mark function. You can set 9 groups of different marks to mark the tag type to be read.

Move the arrow cursor to data comparison, and press the scan key to switch between Y and N. After setting the Y mode, the device enables the comparison function. It will compare the read data with that already imported into the device. If there is correct tag information, the buzzer gives three prompts.

Buzzer Setting:
Move the arrow cursor to the buzzer, and press scan to switch between Y and N.

( “Y” means buzzer is on for sound mode, and “N” means buzzer is off for silent mode.)

데이터 삭제 설정:

Arrow cursor to the Delete Data menu and press scan three times to delete all data in memory.

(Delete the data already stored, so that the previous results do not influence new calculations. Caution: Once deleted, the data cannot be recovered!)

블루투스 설정:

Move the “arrow” cursor to the “Bluetooth” menu, press the “scan” key to

switch to “Y” mode, and turn on the Bluetooth. Switch to “N” mode and turn off the Bluetooth.

(You should use the relevant Bluetooth device to make a connection after turning on Bluetooth. Once the connection is established successfully, then every time the current tag ID number is read by the device, it will send that information to the relevant Bluetooth device via Bluetooth.

Return to default settings:

Move the “arrow” cursor to the “Resume to default setting” menu, press the “scan” key to

Return to the default setting

(이 기능은 잘못 설정한 경우 고객이 편리하게 활성화하고

활성화 후 장비의 공장 설정)

시스템 시간 설정:

The system time of the device can be set by a computer. For the operation method, please refer to the

section “data transmission management.”

1. This 380 animal RFID tag reader is an electronic product, which is transported and stored according to the conventional

전기 장비.

2. Avoid the reader falling or being impacted from a high place.

3. Do not put the reader in a high temperature, humidity, or corrosive environment.

4. 비전문가는 리더 셸을 열면 안 됩니다.

5. 온라인 작동을 위해 제공된 데이터 회선을 이용해 주세요.

6. 배터리 뒷면 덮개를 자주 제거하지 마세요.

7. 배터리 누수 및 부식을 방지하기 위해 장시간 사용하지 않을 때는 배터리를 꺼내주세요.

of the circuit board.