A Dual Frequency UHF Card NFC RFID Smart Card embeds two physically independent RFID modules inside a single ISO 7810 CR80 card body: a UHF chip operating at 860\u2013960 MHz (EPC Class 1 Gen 2 \/ ISO 18000-6C) for long-range identification at vehicle gates, warehouse portals, and parking barriers up to 8 metres away, and an HF\/NFC chip at 13.56 MHz (MIFARE Classic, MIFARE DESFire, or NTAG-compatible per order) for close-range access panel tap, time-attendance terminal, cafeteria payment, and smartphone NFC interaction. The two antennas are co-laminated inside the same card body without electrical interference between them \u2014 they operate on bands separated by 45\u00d7 in frequency, so mutual coupling is negligible and co-existence is unconditional.<\/p>\n
The result: one physical card, carried in one badge holder, serving every reader on a mixed-frequency campus or facility. Issuing one card instead of two also halves the administrative overhead \u2014 one credential record per employee, one revocation action when someone leaves, one replacement when a card is lost.<\/p>\n
<\/p>\n Mixed-frequency infrastructure is not a planning failure \u2014 it is the natural result of layered investment decisions. A manufacturing plant installs a 125 kHz proximity access system in 2009. In 2015, it adds a UHF vehicle identification gate at the main entrance to automate truck check-in. In 2019, it rolls out a 13.56 MHz MIFARE system for canteen cashless payment and attendance tracking. By 2024, every site employee carries three credentials: a legacy 125 kHz fob for the building doors, a UHF card for the vehicle gate, and a MIFARE card for the canteen. The access control administrator manages three separate credential databases. HR issues three items at onboarding. Security revokes three items on termination. And yet the employee still occasionally forgets the right card on the wrong day.<\/p>\n The dual-frequency approach does not require replacing the reader infrastructure \u2014 that is politically and financially impractical in any organisation with existing capital on the balance sheet. It replaces only the card, encoding both protocols on a single substrate. The UHF gate still reads UHF. The HF access panel still reads HF. Nothing in the installed base changes. The only change is that the employee now carries one card instead of two (or three).<\/p>\n This is the business case that drives demand for dual-frequency cards among system integrators who serve enterprise campuses, logistics hubs, and universities \u2014 environments where two independent RFID systems were procured across different budget cycles and are not going to be consolidated anytime soon. Facilities that only need the HF layer \u2014 tap-to-pay, access panel, or NFC smartphone interaction without any long-range gate requirement \u2014 can start with a standard NFC HF smart card<\/a> and upgrade to the dual-frequency configuration when the UHF infrastructure is added.<\/p>\n The UHF antenna is an aluminium-etched dipole printed on a PET substrate, co-laminated at the card core. Chip options include Alien Higgs-3, Alien Higgs-4, Impinj Monza R6, and NXP UCODE 8 \u2014 selected based on the customer\u2019s reader ecosystem and required memory capacity. Read range on a fixed portal reader (8 dBi antenna, 1W ERP): 6\u20138 metres on a standard CR80 card body. The EPC memory bank stores a 96-bit EPC code pre-encoded at the factory or left blank for customer encoding. User memory bank (if chip supports it) can store supplementary data such as asset number or zone allocation. Protocol: ISO 18000-6C \/ GS1 EPC Gen 2.<\/p>\n The HF antenna is a copper wire coil embedded in the card core, tuned to 13.56 MHz \u00b1 0.2 MHz resonance. Chip options: MIFARE Classic 1K\/4K for legacy access systems, MIFARE DESFire EV1\/EV2\/EV3 for high-security applications requiring AES-128 encryption, NTAG213\/215\/216 for NFC Data Exchange Format (NDEF) and smartphone compatibility, ICODE SLIX for ISO 15693 library or supply chain systems, Fudan FM11RF08 for cost-sensitive deployments. Read range at a standard desktop reader or access panel: 3\u20138 cm. This module is the one that interacts with smartphones \u2014 any Android device with NFC or iPhone 7 and later can read NTAG-based configurations without a dedicated app.<\/p>\n UHF (860\u2013960 MHz) and HF (13.56 MHz) operate in frequency bands separated by a factor of approximately 45. The UHF dipole antenna has zero resonant response at 13.56 MHz; the HF coil antenna has zero resonant response at 860 MHz. There is no cross-coupling, no mutual detuning, and no read-range degradation on either module when both antennas are co-laminated in the same card body \u2014 confirmed by ISO 10373-6 and ISO 18000-6C compliance testing on every production batch.<\/p>\n <\/p>\n A university issues 20,000 student ID cards per academic year. The campus runs Iron Logic HF readers on dormitory doors, a UHF portal at the library to detect unreturned books as students exit, ZKTeco UHF time-attendance readers at lecture-hall entrances for automated class register, and an HF MIFARE-based cashless payment system at ten canteen locations. A single Dual Frequency UHF Card NFC RFID Smart Card covers all four systems. Students carry one card. The IT department manages one credential per student. The physical education department uses the NFC module for gym locker assignment. The library uses the UHF module for bulk detection. One card, six functions, zero duplication.<\/p>\n A third-party logistics operator manages a 45,000 m\u00b2 warehouse with 380 staff. Building access uses MIFARE DESFire EV2 readers at 14 entry points \u2014 the HF module on the dual-frequency card handles this. A UHF portal at each of three loading-dock vehicle gates reads forklift operator cards at 5 metres as the forklift passes, logging departure time and operator ID without requiring the driver to stop and tap. The same card that opens the staff break-room door also logs the forklift operator\u2019s dock exit \u2014 without adding a second card to the operator\u2019s lanyard, without adding a second credential database to the WMS, and without requiring the gate reader to support NFC.<\/p>\n A private hospital issues staff ID badges with MIFARE DESFire EV3 for high-security ward access (the HF module) and Impinj Monza R6 for real-time location of crash carts and infusion pumps via UHF RFID infrastructure installed on ward ceilings (the UHF module). The same badge that lets a nurse enter the paediatric ward also identifies which ward the nurse is in for RTLS purposes. No separate UHF badge. No separate wristband. One card, two functions, compliant with ISO\/IEC 14443 and ISO 18000-6C simultaneously.<\/p>\n An event organiser for a 15,000-delegate industry conference prints dual-frequency badges: the NFC module stores the delegate\u2019s vCard and links to their digital profile (scannable by any smartphone at a booth), while the UHF module enables automated session attendance tracking at session-room entrances via fixed UHF portals. Exhibitors tap the badge with their phone to retrieve the delegate\u2019s contact details; the conference organiser captures session attendance automatically without manual scanning. One badge, two use cases, data captured from both.<\/p>\n A dual-frequency card is harder to manufacture than a single-frequency card for one reason: antenna positioning tolerance. The HF coil must be centred within \u00b10.3 mm of the card geometric centre to ensure symmetric read range in all orientations. The UHF dipole must maintain a minimum clearance of 2.5 mm from the HF coil perimeter \u2014 closer than that and the HF coil\u2019s magnetic field begins to detune the UHF antenna at the edge of its bandpass, cutting long-range read distance by 15\u201330%.<\/p>\n This positional requirement is enforced on our lamination line through a vision-guided jig that registers both antenna layers to the card die before lamination. The jig holds \u00b10.2 mm tolerance across both axes simultaneously. After lamination, every card passes through a dual-band tunnel tester \u2014 a custom fixture that excites the UHF module at 915 MHz and the HF module at 13.56 MHz sequentially within 200 ms per card, verifying UID readback and signal amplitude on both channels before the card reaches the packing station. Cards that pass UHF but fail HF, or vice versa, are segregated as individual module failures rather than full card rejections \u2014 because the failure mode diagnoses which manufacturing step introduced the defect.<\/p>\n Monthly output from the dual-frequency card line: 500,000 cards. This is deliberately lower than our single-frequency lines because the dual-band QC fixture runs at half the throughput of a single-band tester. We have chosen not to sacrifice the dual-band test for throughput \u2014 a card that ships with an untested HF module and fails in the field costs the customer far more than the unit price of the card.<\/p>\n <\/p>\n The card body geometry is fixed at ISO 7810 CR80. Everything else is a variable. Most of our B2B customers come with a specific chip combination in mind \u2014 they have a UHF reader ecosystem from one vendor and an HF access panel from another, and they need the card to serve both. We configure the chip combination at order entry, encode the UHF EPC and HF UID at the factory per customer-supplied data file, and print both sides in CMYK to the customer\u2019s artwork.<\/p>\n Customers who need to encode cards in their own facility (for variable data such as employee photo, department code, or expiry date) receive blank cards with pre-tuned antennas and chips that accept desktop reader encoding. The encoding workflow for dual-frequency cards is sequential \u2014 encode the UHF module first using a UHF desktop encoder, then encode the HF module using a 13.56 MHz desktop reader. Both can be done with standard off-the-shelf equipment; no specialised dual-frequency encoder is required.<\/p>\n For customers with no existing reader infrastructure \u2014 startups, new facility deployments, pilot projects \u2014 we accept orders as small as 500 cards with a recommended reader pairing from our ecosystem. Deployments that only require long-range identification without an HF component can also be served by a single-protocol UHF RFID tag<\/a> at a lower unit cost \u2014 we produce both configurations and can advise on which fits the infrastructure before the order is placed. This means a facility manager can trial a dual-frequency deployment without committing to thousands of cards or a multi-year reader contract. Our engineering team will recommend which UHF chip and which HF chip configuration is compatible with the specific readers the customer plans to install, before the order is placed.<\/p>\n No \u2014 and this is by design. A UHF reader operates at 860\u2013960 MHz and only activates the UHF module; an HF reader at 13.56 MHz only activates the HF module. The two protocols are not read simultaneously because no standard reader hardware operates on both frequencies at once. In practice, this is not a limitation \u2014 the card is presented to whichever reader corresponds to the use case. At a vehicle gate, the UHF reader reads the card from the dashboard without the user doing anything. At an access panel, the user taps the card and the HF reader responds.<\/p>\n Yes, for most wallet materials. Leather, fabric, and standard polycarbonate pass UHF signals with minimal attenuation. Metal-lined wallets or card holders with RFID-blocking foil will suppress the UHF signal \u2014 this is the same limitation that applies to any UHF card, not specific to dual-frequency. For vehicle-mounted use cases, the card is typically placed on the dashboard or in a windshield holder rather than kept in a wallet, which eliminates the shielding concern.<\/p>\n The most common combination ordered by enterprise system integrators is Impinj Monza R6 (UHF) + MIFARE DESFire EV2 (HF). The Monza R6 is widely supported by Zebra, Impinj, and Jadak UHF readers. DESFire EV2 provides AES-128 mutual authentication for high-security building access and is supported by HID, Honeywell, and IDEMIA access control platforms. This combination covers the majority of enterprise mixed-infrastructure deployments without requiring proprietary reader hardware on either frequency.<\/p>\n Yes. We offer retransfer printing for photo ID cards \u2014 a process that prints the image onto a transfer film first, then bonds it to the card surface, producing a sharp edge-to-edge photo that does not crack or peel at the card edge. Variable data (name, employee number, department, expiry date, barcode, QR code) is printed per-card from a data file supplied by the customer. Retransfer printing adds three to five working days to the standard lead time and requires a minimum of 500 cards per print run.<\/p>\n A tri-frequency card (125 kHz + 13.56 MHz + 860 MHz) is technically producible but significantly thicker than a standard CR80 and requires a non-standard lamination stack. We produce these on request for customers with legacy 125 kHz infrastructure they cannot yet replace, but we recommend the dual-frequency UHF + HF combination for all new deployments \u2014 LF proximity is a technology on a declining install base, and most integrators are migrating legacy LF infrastructure to HF or UHF rather than extending it.<\/p>\n Tell us your UHF chip preference, your HF chip preference, and whether you need blank cards or factory-encoded cards. We ship a ten-card sample kit \u2014 five in each chip combination you specify \u2014 within five business days to any verified company address. No minimum order commitment, no engineering fee, no obligation beyond testing whether the card works with your existing reader infrastructure before placing a production order.<\/p>\n Email: nick@toptaggroup.com | WhatsApp: +852 5989 6589<\/a> | WeChat: 147891664<\/p>\n![\"Dual](\"https:\/\/www.toptaggroup.com\/wp-content\/uploads\/2023\/03\/\u900f\u660e\u53615.jpg\" "\\"C\u0103rtic\u0103")
The Problem This Card Was Designed to Solve<\/h2>\n
Two Independent Modules \u2014 How the Card Works<\/h2>\n
UHF module: 860\u2013960 MHz, EPC Class 1 Gen 2<\/h3>\n
HF\/NFC module: 13.56 MHz, ISO 14443 \/ ISO 15693<\/h3>\n
Why the two modules do not interfere<\/h3>\n
![\"Dual](\"https:\/\/www.toptaggroup.com\/wp-content\/uploads\/2023\/03\/dual-freq-4layer-separated-v6-1024x683.jpg\" "\\"Dual")
Four Deployment Scenarios Where One Card Earns Its Cost<\/h2>\n
Smart campus \u2014 student ID that does everything<\/h3>\n
Logistics hub \u2014 staff access plus forklift gate automation<\/h3>\n
Healthcare facility \u2014 patient zone access plus asset tracking<\/h3>\n
Trade show and events \u2014 pre-registration plus session tracking<\/h3>\n
Dual Frequency UHF Card NFC RFID Smart Card Technical Specifications<\/h2>\n
\n\n
\n Parameter<\/th>\n Value<\/th>\n<\/tr>\n \n Card standard<\/td>\n ISO 7810 ID-1 (CR80): 85.6 \u00d7 54.0 \u00d7 0.86 mm \u00b1 0.08 mm<\/td>\n<\/tr>\n \n UHF chip options<\/td>\n Alien Higgs-3, Alien Higgs-4, Impinj Monza R6, NXP UCODE 8<\/td>\n<\/tr>\n \n UHF frequency<\/td>\n 860\u2013960 MHz (global band), ISO 18000-6C \/ EPC Class 1 Gen 2<\/td>\n<\/tr>\n \n UHF read range<\/td>\n 6\u20138 m (fixed portal, 8 dBi antenna, 1 W ERP); 3\u20135 m (handheld reader)<\/td>\n<\/tr>\n \n UHF EPC memory<\/td>\n 96-bit EPC + 32-bit TID (chip-dependent); user memory 0\u2013512 bits<\/td>\n<\/tr>\n \n HF\/NFC chip options<\/td>\n MIFARE Classic 1K\/4K, MIFARE DESFire EV1\/EV2\/EV3, NTAG213\/215\/216, ICODE SLIX, Fudan FM11RF08<\/td>\n<\/tr>\n \n HF frequency<\/td>\n 13.56 MHz, ISO 14443-A (MIFARE\/NTAG) or ISO 15693 (ICODE)<\/td>\n<\/tr>\n \n HF read range<\/td>\n 3\u20138 cm (ISO 14443); up to 100 cm (ISO 15693 with high-power reader)<\/td>\n<\/tr>\n \n Card substrate<\/td>\n PVC (standard); PET composite or polycarbonate on request<\/td>\n<\/tr>\n \n UHF antenna<\/td>\n Aluminium-etched dipole on PET, co-laminated at card core<\/td>\n<\/tr>\n \n HF antenna<\/td>\n Copper wire coil, ultrasonically embedded, 13.56 MHz tuned \u00b1 0.2 MHz<\/td>\n<\/tr>\n \n Imprimare<\/td>\n CMYK offset or digital print, full bleed both sides; Pantone match available<\/td>\n<\/tr>\n \n Personalisation<\/td>\n Thermal transfer printing, laser engraving (polycarbonate only), embossing, holographic overlay<\/td>\n<\/tr>\n \n Security features<\/td>\n UV fluorescent ink, holographic laminate, signature panel, laser-perforation serial number<\/td>\n<\/tr>\n \n Temperatura de func\u021bionare<\/td>\n \u221225\u00b0C to +70\u00b0C<\/td>\n<\/tr>\n \n Certific\u0103ri<\/td>\n ISO 9001 (factory), CE, RoHS<\/td>\n<\/tr>\n \n MOQ<\/td>\n 500 pcs (standard chip combination); 1,000 pcs (custom antenna or chip)<\/td>\n<\/tr>\n \n Lead time<\/td>\n 7\u201314 working days (standard); 15\u201321 working days (custom print + encoding)<\/td>\n<\/tr>\n \n Ambalare<\/td>\n 100 pcs \/ inner box; 5,000 pcs \/ export carton<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n Manufacturing \u2014 Why Co-Lamination Quality Determines Read Range<\/h2>\n
![\"Dual](\"https:\/\/www.toptaggroup.com\/wp-content\/uploads\/2023\/03\/IMG_2951-1024x683.webp\" "\\"Dual")
Customisation \u2014 What Changes and What Stays Fixed<\/h2>\n
Frequently Asked Questions<\/h2>\n
Can both chips on the card be read at the same time?<\/h3>\n
Does the UHF module work when the card is inside a wallet?<\/h3>\n
What chip combination is the most popular for enterprise deployments?<\/h3>\n
Can you print employee photos and variable data on each card?<\/h3>\n
Is there a version with three frequencies \u2014 LF, HF, and UHF?<\/h3>\n
Request a Free Sample Kit<\/h2>\n